Low Cost Transmission Physician offers a wide range of automotive air conditioning repair services at our St. Petersburg location. The heating, ventilation, and air conditioning (HVAC) system in your vehicle is designed to maintain a comfortable environment in the interior while driving and also provides safety features such as defrosting of your windows.

Here Are Some Of The Services We Provide:

  • Accumulator
  • Ambient Temperature Switch
  • Ambient Temperature Switch
  • Blower Motor Switch
  • Condenser
  • Discharge Air Temperature
  • Air Conditioning
  • Blower Motor Replacement
  • Cabin Temperature Sensor
  • Control Assembly
  • Evaporator
  • Heater Hose
  • Refrigerant Charge
  • Vacuum Reservoir
  • Heater Core
  • Receiver Dryer
  • Blower Motor Relay
  • Air Conditioning Recharge
  • Blower Motor Resistor
  • Compressor Repair
  • Control Module
  • Heater Sensor
  • High Pressure Safety Valve
  • Refrigerant Leaks
  • Vacuum Solenoid Valve

Unlike auto air conditioning, the heater and ventilation system is standard in all North American automobiles. Taking air in through a duct at the base of the windshield, the “flow through ventilation system” passes the air through a heater core before distributing it to the vehicle’s interior via the dashboard vents. Vents in the rear of the auto serve to exhaust stale air from the interior when in motion. The heater core is actually a small radiator that is connected to the cooling system. The heated engine coolant warms air directed through the heater core. The temperature in the auto interior is regulated by controlling the coolant flow and/or by mixing colder air from outside the vehicle. Automatic or manual controls are then used to adjust the temperature and air flow inside the car.

The auto air conditioning system works in a very similar manner to those that cool homes and other buildings. A gas – such as Freon – is placed into a system that is sealed. The gas is then heated as a result of being pressurized by a compressor. Once pressurized the heated gas then travels to the condenser where it gives off its heat to a flow of cool air and condenses to a liquid. This liquid is then transported to the receiver-dryer tank where the excess fluid is stored and any water removed. The liquid in the receiver-dryer tank then flows to the expansion valve which meters it into the air conditioning system’s expansion valve inside the car. The cool, high pressure liquid then expands into a cold, low pressure gas. This evaporation process is what ultimately provides the passengers in the vehicle with a cool flow of air during the hot summer months.

Call Lowcost Transmission Physician today at 727-327-7174 for all of your automotive repair needs.